Explorer Sport 2WD V6-4.0L VIN E (2002)
Brake Pedal Assy: Service and Repair
Brake Pedal And Bracket
Removal and Installation
All vehicles
1. NOTE: When removing the stoplight switch, retain the bushing and hairpin clip. They will be required for installation.
Disconnect the brake booster push rod.
1
Remove the hairpin clip.
2
Separate the stoplight switch and the brake booster push rod from the brake pedal pin.
3
Remove the brake booster push rod bushing.
Vehicles with manual transmission
2. Disconnect the clutch master cylinder push rod.
3. Disconnect the Clutch Pedal Position Switch (CPP).