Explorer Sport 2WD V6-4.0L VIN E (2002)
Cruise Control Servo Cable: Adjustments
1. Remove the speed control actuator cable clip.
2. Adjust the speed control actuator cable.
1
Hold the throttle body cam is in the closed position.
2
Pull on the speed control actuator cable housing to remove any slack.
3
Back off the speed control actuator cable one notch and install the clip.
NOTE:
^
The speed control actuator cable must not be pulled tight for correct operation.
^
The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.