Explorer Sport 2WD V6-4.0L VIN E (2002)
Center Mounted Brake Lamp Bulb: Service and Repair
REMOVAL
1. Remove the liftgate glass.
NOTE: The high mounted stoplamp bulb is not repairable. Install a new high mounted stoplamp as an assembly.
2. Remove the tape.
3. Remove the three nuts.
1
Disconnect wiring harness tab.
2
Remove the nuts.
4. Remove the high-mounted stoplamp.
1
Disconnect the electrical connector.
2
Remove the high-mounted stoplamp.
INSTALLATION
1. To install, reverse the removal procedure.