Explorer Sport 2WD V6-4.0L VIN E (2002)
Evaporative System Service Port: Service and Repair
REMOVAL
1. Remove the clip.
2. Disconnect the hoses.
3. Remove the test port assembly.
^
Disconnect the fitting.
^
Remove the test port assembly.
INSTALLATION
1. To install, reverse the removal procedure.
^
Leak test the evaporative emissions system. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission
System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle
