Explorer Sport 2WD V6-4.0L VIN E (2002)
Ignition Cable: Service and Repair
Spark Plug Wire Remover
SPECIAL TOOL(S)
REMOVAL
1. Remove the right front tire.
2. Remove the right front fenderwell splash shield.
3. With a twisting motion, use the special tool to pull the spark plug wires from the right side of the engine.
CAUTION:
^
Spark plug wires must be connected correctly. Mark the spark plug wires before removing them.
^
It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.
4. Lower the vehicle.
5. With a twisting motion, use the special tool to pull the spark plug wires from the left side of the engine.
CAUTION:
^
Spark plug wires must be connected correctly. Mark the spark plug wires before removing them.
^
It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.