Explorer Sport 2WD V6-4.0L VIN E (2002)
8. Position the RCM cover. Install the screws and the mat.
Vehicles with seat side air bags and power driver seat
9. Connect the battery ground cable.
Vehicles with seat side air bags
10. Move and tilt the front seats to their highest and most forward position.
Vehicles with seat side air bags and power driver seat
11. Disconnect the battery ground cable and wait at least one minute.
All vehicles
12. Reactivate the supplemental restraint system (SRS). Refer to Air Bag(s) Arming and Disarming.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES, AND
INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION/REACTIVATION PROCEDURE. Refer
to Air Bag(s) Arming and Disarming.
13. With all the diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
