Explorer Sport 2WD V6-4.0L VIN E (2002)
6. Position the side air bag module studs, with the shield still in place, through the seat backrest mounting bracket holes.
^
Do not pinch the side air bag module wiring harness between the side air bag module and the mounting bracket.
CAUTION: Make sure the side air bag wiring harness is not pinched between the side air bag module and the mounting bracket.
7. Route the side air bag module wire harness and install the side air bag nuts and tighten in the sequence shown.
1
Route the side air bag module wire harness to the back side of the side air bag mounting bracket making sure it is not pinched between the side
air bag module and the mounting bracket.
2
Install the side air bag nuts.
CAUTION:
^
The retaining nuts of the side air bag module must be tightened in the sequence described.
^
Make sure the side air bag wiring harness is not pinched between the side air bag module and the mounting bracket.
8. Install the side air bag stud covers.