Explorer Sport 2WD V6-4.0L VIN E (2002)
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
24. Position the driver air bag module to the steering wheel.
1
Connect the driver air bag module electrical connector.
2
Position the driver air bag module to the steering wheel.
25. Install the two driver air bag module retaining bolts.
26. Install the two steering wheel back cover plugs.
Vehicles with seat side air bags and power driver seat
27. Connect the battery ground cable.
Vehicles with seat side air bags
28. Move the driver seat rearward.
Vehicles with seat side air bags and power driver seat
29. Disconnect the battery ground cable and wait at least one minute.
All vehicles
30. Reactivate the supplemental restraint system (SRS). Refer to Air Bag(s) Arming and Disarming.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES, AND
INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION/REACTIVATION PROCEDURE. Refer
to Air Bag(s) Arming and Disarming.
31. With all the restraint system diagnostic tools removed, prove out the air bag system. See: Air Bag(s) Arming and Disarming/Service and
