Explorer Sport 2WD V6-4.0L VIN E (2002)
Seals and Gaskets: Service and Repair
Extension Housing Gasket
Extension Housing Gasket
Removal
1. Raise and support the vehicle.
2. NOTE: To maintain initial driveshaft balance, mark the rear driveshaft yoke and axle flange so they may be installed in their original alignment.
Mark the rear driveshaft.
3. Remove the rear driveshaft.
1
Remove the bolts.
2
Remove the rear driveshaft.
4. Remove the nuts.
5. Raise and support the transmission.