Explorer Sport 2WD V6-4.0L VIN E (2002)
4. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install two M6 x 35 mm (1.4 inch) screws.
5. Remove the special tools.
6. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install the M6 x 30 mm (1.2 inch) screw.
7. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install the sixteen M6 x 40 mm (1.6 inch) main control valve body screws.