Explorer Sport 2WD V6-4.0L VIN E (2002)
2. NOTE: Use the yellow snap rings supplied in the kit to assemble the universal joint (U-joint). If difficulty is encountered with the yellow snap
rings, install the black snap rings.
Remove the driveshaft from the special tool, and install the snap ring.
Opposite bearing cup installation
3. Repeat Bearing cup installation to install the bearing cup and the snap ring on the opposite side of the driveshaft yoke.
Slip-yoke installation
4. Inspect the driveshaft slip-yoke. Install a new yoke, if necessary.
5. Repeat Bearing cup installation to install the driveshaft slip-yoke and the remaining new bearing cups and snap rings.
Final assembly
6. NOTE: Do not strike the bearings.
Check the U-joints for freedom of movement.
-
If binding, strike the yoke with a brass or plastic hammer.
7. Install the driveshaft.