Explorer Sport 2WD V6-4.0L VIN E (2002)
Flywheel: Service and Repair
Removal and Installation
Flywheel
Removal
1. Remove the disc and pressure plate.
2. Install the flywheel holding tool and remove the flywheel bolts. Remove the flywheel.
Installation
1. Inspect the flywheel for cracks, hot spots and scoring. If damage is found to the flywheel friction surface, machine flywheel friction surface. If
damage found to the ring gear teeth, replace ring gear.
2. NOTE: Apply threadlock and sealer to the flywheel bolt threads before installation.
Position the flywheel onto the crankshaft and install the flywheel bolts.
3. Tighten the bolts in sequence to specification.
4. Install the disc and pressure plate.