Explorer Sport 2WD V6-4.0L VIN E (2002)
NOTE: In order for the rear widow glass to function correctly the locating clip must engage the pinch weld at the rear of the cab during
installation.
18. Remove the excess foam butyl from the window opening.
19. If necessary, remove the center rear window glass from the module.
INSTALLATION
1. To install, reverse the removal procedure.
^
Apply 6 mm (0.23 in) foam butyl or equivalent meeting Ford specification WSB-M2G234-C to the rear window glass module.
^
Start at the bottom and work around the module.
2. Reinitialize the rear window glass motor.