Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
1. Clean and lubricate the brake backing plate.
^
Use Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound
meeting Ford specification ESE-M1C171-A.
2. Attach the parking brake lever to the rear brake shoe and lining and secure the parking brake lever pin retainer.
3. Install the rear brake shoes and linings.
1
Position the rear brake shoes and linings.
2
Install the brake shoe hold-down spring pins and the brake shoe hold-down springs.
4. Install the parking brake strut.
1
Install the parking brake link spring and the parking brake spring retainer on the parking brake strut.
2
Install the parking brake strut.
3
Install the brake shoe anchor pin guide plate.
