Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. Prepare the vehicle for vacuum reservoir removal.
1
Disconnect the battery ground cable.
2
Remove the air cleaner assembly.
2. Remove the screws. Position the air cleaner housing mounting bracket out of the way.
3. Raise and support the vehicle.
4. Remove the screws.
5. Lower the vehicle.
6. Label and disconnect the vacuum hoses. Remove the vacuum reservoir.
NOTE: The vacuum hoses to the vacuum reservoir are not interchangeable. Note the location of each vacuum hose to make sure of correct
installation.
INSTALLATION
1. To install, reverse the removal procedure.
