Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
14. Position the lower steering column opening finish panel reinforcement and install the bolts.
15. Install the lower steering column opening finish panel.
1
Position the lower steering column opening finish panel to the I/P and push in at the top, seating the retaining clips.
2
Install the screws.
16. Position the hood release handle and install the screws.
17. Connect the battery ground cable.
18. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove could result in injury and possible violation of vehicle safety standards.
With the restraint system diagnostic tool removed, prove out the air bag system.