Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Band Apply Servo: Service and Repair
Front Servo
Front Servo
Special Tools
Special Tool(s)
Removal
1. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its
adaptive strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary
condition and will eventually return to normal operating condition.
Disconnect the battery ground cable.
2. Raise and support vehicle.
3. Remove the shift cable.
1. Disconnect the shift cable from the manual control ]ever.
2. Remove the shift cable from the bracket.
4. Remove the digital Transmission Range (TR) sensor.
5. Remove the main control valve body.
6. Remove the Three Way Catalytic Converter (TWC).
7. NOTE: If equipped, the transmission servo heat shield needs to be unclipped from the fluid pan rail and positioned out of the way for fluid pan
removal.