Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
13. Install the passenger seat rear track bolt covers.
14. Using the special tool, install the safety belt buckle support bolt.
15. Install the safety belt buckle support bolt cover.
16. Remove the restraint system diagnostic tool from the driver seat side air bag floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.