Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
6. Remove the CPP switch.
^
Pinch the lock tabs and pull the clip forward.
^
Rotate and snap the CPP switch from the clutch master cylinder rod.
7. Remove the reservoir.
8. Remove the three pushpins, four bolts, four screws and the inner fender splash shield.
9. Unclip the hydraulic line-to-frame retainer.
10. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash the surface with
water immediately.
