Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Universal Joint: Service and Repair
Flange Yoke
Driveshaft Universal Joint-Flange Yoke
Special Tools
Special Tool(s)
Disassembly
1. Remove the driveshaft.
2. CAUTION: Do not clamp the driveshaft in a vise or similar holding fixture.
Place the driveshaft on a suitable workbench, being careful not to damage the tube.
3. NOTE: If components are not marked and installed correctly, driveline imbalance can occur.
Index-mark the positions of the driveshaft components.
4. Clamp the U-Joint tool in a vise.