Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Flywheel: Service and Repair
Dowels - Flywheel
Dowels, Flywheel
Removal and Installation
1. NOTE: Take care not to damage the flywheel dowel holes or the surface areas around the flywheel dowel during removal.
Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole and a pair of locking pliers where the
flywheel dowel is installed in a blind hole.
2. NOTE: Care should be taken to drive the flywheel dowel squarely into place until it is fully seated and to not damage the surrounding surface
areas.
Install all flywheel dowels by driving them into place using a brass or plastic mallet.