Explorer Sport Trac 2WD V6-4.0L (2009)
11. Roll the backrest trim cover down, attach the hook-and-loop strips and install the first row of hog rings.
12. Roll the backrest trim cover down, attach the hook-and-loop strips and connect the backrest trim cover lower J-clip.
13. Position the backrest trim cover to the inboard and outboard recliners and install the plastic rivets.
14. Install the 2 head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve See: Head Rest/Service and Repair.
15. Install the front seat backrest. For additional information, refer to Seat Backrest - Front See: Removal and Replacement/Front Seats/Seat Backrest
- Front.
16. Install the front seat. If a passenger seat has been serviced, do not prove out the SRS at this time. For additional information, refer to Seat -
Front See: Service and Repair/Front Seats/Seat - Front.
Passenger seat
17. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS. For additional information, refer to
General Procedures portion of Air Bag Systems. See: Restraint Systems/Air Bag Systems/Testing and Inspection/Component Tests and General
Diagnostics
Seat Backrest - Second Row, 40 Percent E-Z Entry
Seat Backrest - Second Row, 40 Percent E-Z Entry
Second Row, 40 Percent E-Z Entry Backrest