Explorer Sport Trac 2WD V6-4.0L (2009)
14. NOTICE: The RH camshaft sprocket bolt is a LH-threaded bolt. Turning the bolt in the wrong direction can damage the bolt.
Tighten the bolts.
1. Tighten the Camshaft Sprocket Holding Tool top 2 clamp bolts to 10 Nm (89 lb-in).
2. Calculate the correct torque wrench setting for the following torque.
Using the Torque Wrench Extension with the Camshaft Sprocket Nut Socket 303-565, tighten the camshaft bolt to 85 Nm (63 lb-ft).
15. Remove the Timing Chain Tensioner.
16. NOTE: Install a new washer on the tensioner.
Install the RH hydraulic timing chain tensioner.
-
Tighten to 44 Nm (32 lb-ft).
17. Remove the Camshaft Holding Tool, the Adapter for 303-577, the Camshaft Sprocket Holding Tool and the Adapter for 303-564 from the RH
cylinder head.
18. Install the Camshaft Sprocket Holding Tool and the Adapter for 303-564 on the front of the LH cylinder head and tighten the top 2 clamp bolts to
10 Nm (89 lb-in).