Explorer Sport Trac 2WD V6-4.0L (2009)
NOTE: Position the camshaft timing slots below centerline of camshaft.
Install the Camshaft Holding Tool and the Adapter for 303-577 on the front of the RH cylinder head.
NOTE: Leave the top 2 Camshaft Sprocket Holding Tool clamp bolts loose.
Install the Camshaft Sprocket Holding Tool and the Adapter for 303-564 on the rear of the RH cylinder head.
NOTICE: The RH camshaft sprocket bolt is a LH-threaded bolt. Turning the bolt in the wrong direction can damage the bolt.
Tighten the bolts.
NOTE: Do not tighten the Camshaft Sprocket Holding Tool top 2 clamp bolts. The camshaft sprocket must rotate freely.
Install the Camshaft Sprocket Holding Tool and the Adapter for 303-564 on the front of the LH cylinder head.
NOTE: Camshaft timing slots are off-center.
NOTE: Position the camshaft timing slots below centerline of camshaft.
Install the Camshaft Holding Tool and the Adapter for 303-577 on the front of the LH cylinder head.