Explorer Sport Trac 2WD V6-4.0L (2009)
Air Bag Deactivation Indicator: Service and Repair
Passenger Air Bag Deactivation (PAD) Indicator
Removal and Installation
1. NOTE: Ignition must be OFF if disconnecting the Passenger Air Bag Deactivation (PAD) indicator electrical connector. Otherwise, a DTC will be
set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least one minute.
2. Remove the floor console.
3. Gently pull outward to release the clips on the instrument panel center finish panel.
4. Disconnect the PAD indicator electrical connector.
5. Remove the 2 screws and PAD indicator.
6. To install, reverse the removal procedure.