Explorer Sport Trac 2WD V6-4.0L (2009)
-
Wiring, terminals or connectors
-
Trailer
-
SJB
PINPOINT TEST AB: THE TRAILER LAMPS ARE ON CONTINUOUSLY
NOTICE: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the
connector.
NOTE: Before beginning diagnostics, visually inspect the trailer tow connector for signs of corrosion or damage. Repair or install a new trailer tow
connector as required.
-------------------------------------------------
AB1 CHECK FOR VOLTAGE AT THE TRAILER TOW CONNECTOR
-
Ignition OFF.
-
Disconnect the trailer from the vehicle.
-
Ignition ON.
-
Measure the voltage between the trailer tow connector, harness side and ground as follows:
-
Is any voltage present?
Yes
GO to AB2.
No
The vehicle is operating correctly. SEND the trailer to an authorized camper/trailer repair facility.
-------------------------------------------------
AB2 CHECK THE SJB
-
Ignition OFF.
-
Disconnect: SJB C2280a.
-
Ignition ON.
-
Measure the voltage between the trailer tow connector, harness side and ground as follows: