Explorer Sport Trac 2WD V6-4.0L (2009)
1. With the vehicle in PARK, position it on a hoist. Set the vehicle as close to level as possible.
2. Remove the transmission fluid drain plug (large plug) and allow the transmission fluid to drain.
Refill
1. Install the transmission fluid drain plug.
-
Tighten to 26 Nm (19 lb-ft).
2. Hold the larger transmission fluid drain plug with a wrench and remove the small (center) transmission fluid level indicating plug.
3. Install the Fluid Level and Fill Plug Adapter into the transmission fluid pan.
4. NOTE: Prior to filling the Fluid Transporter/Evacuator/Injector with transmission fluid, make sure that the canister is clean.
Fill the Fluid Transporter/Evacuator/Injector with transmission fluid.
5. Hang the Fluid Transporter/Evacuator/Injector under the vehicle, upright and close to the transmission.