Explorer Sport Trac 2WD V6-4.0L (2009)
across the positive and negative bus connection in the termination module. With 2 termination modules on each network, and the 120 ohm resistors
located in a parallel circuit configuration, the total network impedance, or total resistance is 60 ohms.
Network termination improves bus message reliability by:
-
Stabilizing bus voltage
-
Eliminating electrical interference
Gateway Module
The IC is the gateway module, translating HS-CAN to MS-CAN and vice versa. This information allows a message to be distributed throughout both
networks. The IC is the only module on this vehicle that has this ability.
