Explorer Sport Trac 2WD V6-4.0L (2009)
EGR Valve: Service and Repair
Exhaust Gas Recirculation (EGR) System Module
Exhaust Gas Recirculation (EGR) System Module - 4.0L SOHC
Removal and Installation
1. Disconnect the EGR system module electrical and vacuum connectors.
2. Disconnect the EGR system module-to-exhaust manifold tube upper fitting.
-
To install, tighten to 40 Nm (30 lb-ft).
3. NOTE: When installing the new EGR module gasket, install with the side with the raised circle facing the intake manifold.
Remove the 2 bolts, the EGR system module and the gasket. Discard the gasket.
-
To install, tighten to 25 Nm (18 lb-ft).
4. NOTE: The EGR system module sealing surfaces are soft metals.
Carefully clean the EGR system module sealing surfaces.
5. To install, reverse the removal procedure.
-
Install a new EGR system module gasket.