Explorer Sport Trac 2WD V6-4.0L (2009)
5. Separate the quick connect coupling.
Connect - Type I
1. Inspect the quick connect coupling and the tube for damage. Remove any dirt or obstructions.
2. NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
NOTE: Lubricate the quick connect coupling with clean engine oil.
Connect the quick connect coupling.
3. Push the clip up into the quick connect coupling. Pull on the tube to make sure it is seated correctly.
4. Clip the locking tab in place.
5. Connect the battery ground cable.
Disconnect - Type II
WARNING: Always disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or
fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in