Explorer Sport Trac 2WD V6-4.0L (2009)
Parking Assist Control Module: Service and Repair
Parking Aid Module (PAM) - Explorer Sport Trac
Removal and Installation
1. Remove the cab rear trim panel.
2. If replacing the parking aid speaker only, proceed as follows:
-
Disconnect the parking aid speaker electrical connector.
-
Disengage the parking aid speaker clips.
-
Remove the parking aid speaker.
3. If replacing the Parking Aid Module (PAM), proceed as follows:
-
Disconnect the electrical connectors.
-
Remove the PAM screw.
-
Remove the PAM.
4. To install, reverse the removal procedure.