Explorer Sport Trac 2WD V6-4.0L (2009)
20. Under driver seat, the rear of the slide and disengage the driver seat side air bag module electrical connector locking clip, release the tab and
disconnect the driver seat side air bag module electrical connector.
21. Install the RCM fuse 17 (10A) to the SJB.
22. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove the RCM fuse 17 (10A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Connect the driver seat side air bag module electrical connector and engage the seat side air bag electrical connector locking clip.
Explorer Sport Trac vehicles
4. Connect the driver side safety canopy module electrical connector.
5. Connect the passenger side safety canopy module electrical connector.
6. Install the driver and passenger upper C-pillar trim panels.
Explorer and Mountaineer vehicles
7. Connect the driver side safety canopy module electrical connector.