Explorer Sport Trac 2WD V6-4.0L (2009)
4. Disconnect the TR sensor connector.
5. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Remove the selector lever cable from the manual control lever.
6. Remove the manual control lever nut.
7. Remove the TR sensor.
Installation
1. NOTICE: The Transmission Range (TR) sensor must fit flush against the boss on the case to prevent damage to the sensor.
Install the TR sensor and loosely install the TR sensor screw and washer (2 required).