Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
5. Remove the seat cushion flex mat.
1
Unhook the rear flex mat J-clip.
2
Unhook the front flex mat J-clip.
3
Remove the seat cushion flex mat.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to unhook the rear flex mat J-clip.
ASSEMBLY
1. Install the seat cushion flex mat.
1
Position the seat cushion flex mat.
2
Hook the front flex mat J-clip.
3
Hook the rear flex mat J-clip.
CAUTION: The flex mat J-clips must be installed with the openings facing down or the seat cushion may be damaged.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to hook the rear flex mat J-clip.
2. Position the seat cushion trim cover on the seat cushion hook and loop strips.