Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
8. Disconnect the appropriate solenoid electrical connector.
1
Disconnect shift solenoids electrical connectors.
2
Disconnect the Torque Converter Clutch (TCC) solenoid electrical connector.
3
Disconnect the Electronic Pressure Control (EPC) solenoid electrical connector.
9. CAUTION: The TCC solenoid and converter modulator valve may pop out of its bore. This may damage the solenoid or converter modulator
valve.
CAUTION: Shift Solenoid (SSC) may pop out of its bore. This may damage the solenoid.
Remove the shift solenoids.
1
Remove the wire harness
2
Remove the solenoid clamp screws.
3
Remove the solenoid clamp
4
Remove the appropriate solenoid(s)
Installation
1. Install the new solenoid(s)
