Shifter A/T Adjustment for Ford Explorer Sport Trac 2WD V6 (2002)
5. Remove the ignition switch lock cylinder.
1
Rotate the ignition switch lock cylinder to the RUN position.
2
Press the lock cylinder release pin and remove the ignition switch lock cylinder.
6. Remove the lower steering column shroud.
1
If so equipped, remove the tilt wheel handle and shank.
2
Remove the three screws.
3
Remove the lower steering column shroud.
7. Remove the upper steering column shroud.
8. Disconnect the Transmission Control Switch (TCS) harness connector.
