Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in
major service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of
these parts.
CAUTION: Orientation of the suspension fasteners is important. Make sure the fasteners are installed in the same direction as they were in
when removed.
1. Measure the distance from the center of the hub to the lip of the fender with the vehicle in a level, static ground position (curb height).
2. If equipped, remove the wheel speed sensor bolt and position the sensor aside.
3. CAUTION: Do not loosen the halfshaft nut and washer until the wheel and tire are removed from the vehicle. Wheel bearing damage
