Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
7. Remove the lower transmission fluid cooler bolts and the transmission fluid cooler.
Installation
All vehicles
1. Install the transmission fluid cooler and the lower transmission fluid cooler bolts.
^
Tighten to 7 Nm (62 inch lbs.)
2. Install the upper transmission fluid cooler bolt.
^
Tighten to 7 Nm (62 inch lbs.)
3. NOTE: Clean the cooler tube stems with degreaser prior to installing the hoses.
Using new hoses and clamps, install the transmission fluid cooler hoses.