Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
1
Position the front safety belt guide.
2
Using the special tool, install the front safety belt guide bolt.
3
Close the front safety belt guide bolt cover.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
^
If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
4. Install the lower B-pillar trim panel and scuff plates.
1
Align the lower B-pillar trim panel and scuff plates to the B-pillar and push in fastening the retainers to the upper B-pillar trim panel.
2
Align and fasten the scuff plate retainers.
NOTE: The front seat is removed for clarity.
5. Install the coat hook.
1
Position the coat hook.
2
Install the screw.
6. Install the front safety belt anchor.
1
Position the front safety belt anchor.
2
Using the special tool, install the front safety belt anchor bolt.
NOTE: Make sure to tighten nuts and bolts to specification.