Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
20. Install the passenger air bag module heat shield and the 4 bolts. Attach the wiring retainer.
21. Close glove compartment door.
22. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
23. CAUTION: The clockspring electrical connectors are unique and cannot be connected to the driver air bag module in the wrong
position. Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the
driver air bag module.
Connect the driver air bag module electrical connectors as noted in removal.
24. Install the 2 driver air bag module bolts (1 shown).
-
Tighten to 7 Nm (62 lb-in).