Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Truck Bed Storage Compartment Handle: Service and Repair
PICKUP BED STORAGE COMPARTMENT RELEASE HANDLE
Removal and Installation
1. Remove the 2 pickup bed storage compartment release handle bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
2. CAUTION: Do not allow the pickup bed storage compartment lid to close until the latch has been connected to the cable. If the lid is
closed prior to attaching the cable to the latch, releasing the latch is extremely difficult.
Remove the pickup bed storage compartment latch.
3. NOTE: Note the routing of the pickup bed storage compartment release cable.
Release the routing clips and remove the pickup bed storage compartment release handle and cable as an assembly.
4. To install, reverse the removal procedures.
