Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Intermediate
Parking Brake Cable - Intermediate
NOTE: The equalizer is integral to the intermediate cable.
Note: The Equalizer Is Integral To The Intermediate Cable.
Removal and Installation
1. Release the tension on the parking brake cable. For additional information, refer to Parking Brake Cable Tension Release.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair
3. Disconnect the intermediate parking brake cable from the front cable at the cable connector clip.
4. Disconnect the LH and RH rear parking brake cables from the intermediate parking brake cable at the equalizer.
5. Remove the intermediate parking brake cable.
6. To install, reverse the removal procedure.