Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Oil Cooler: Service and Repair
Oil Cooler
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair
2. Drain the cooling system. For additional information, refer to Cooling System.
3. Remove and discard the oil filter.
^
To install, tighten to 13 Nm (10 ft. lbs.).
4. Disconnect the oil cooler inlet hose from the oil cooler.
5. Disconnect the heater hose from the oil cooler.
6. Loosen the threaded insert and remove the oil cooler.
^
To install, tighten to 57 Nm (42 ft. lbs.).