Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Transmission Position Switch/Sensor: Adjustments
Transmission Range (TR) Sensor Adjustment
Special Tool(s)
Adjust
1. With the vehicle in NEUTRAL, position it on a hoist For additional information, refer to Maintenance/Service and Repair.
2. Remove the cable shield by prying on the side of the shield closest to the boot, then sliding the shield away from the boot.
3. Move the rubber boot back to gain access to the connector.
4. Disconnect the digital transmission range (TR) sensor electrical connector.
5. Remove the range selector lever cable end from the manual control lever.