Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Alternator: Service and Repair
GENERATOR
Removal and Installation
1. Disconnect the battery.
2. Rotate the front end accessory drive belt tensioner counterclockwise and position the front end accessory drive belt aside.
3. Position the protective cover aside and remove and discard the generator B+ terminal nut.
-
To install, tighten to 8 Nm (71 lb-in).
4. Disconnect the generator B+ terminal and the 2 electrical connectors.
5. Remove the 3 bolts and the generator.
-
To install, tighten to 47 Nm (35 lb-ft).