Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
![background image](/ford/explorer_sport_trac_4wd/v6-4.0l_vin_e/Page-1586006.png)
12. Set the halfshaft assembled length to specifications.
1
Measure the entire assembly length.
2
Push in or pull out on the inner joint as necessary to adjust the halfshaft assembled length.
3
Hold the inner joint to prevent the assembled length from changing, and insert a small flat-blade screwdriver between the boot and the joint to
equalize the pressure.
13. Using the special tool, install the boot clamps.
14. Install the halfshaft assembly.
Rear Drive Halfshafts
Halfshaft Joint