Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
![background image](/ford/explorer_sport_trac_4wd/v6-4.0l_vin_e/Page-2952003.png)
9. NOTE: LH shown, RH similar.
Lower the setting blocks.
-
Use a flat screwdriver to release the setting block and lower.
10. NOTE: Lubricate the urethane adhesive with water to aid the special tool when cutting.
Using the special tool, cut the urethane adhesive from the windshield glass starting at the top center and working toward the bottom corners.
11. Using the special tool, distance the windshield from the body.
12. NOTE:
-
Removing the windshield glass requires more than one technician.
-
Be sure not to scratch the pinch weld while removing windshield glass.
Using the special tool, cut the remaining urethane adhesive and remove the window glass.