ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cylinder Block Cradle|Page 2946 > < Cylinder Block Cradle|Page 2944
Page 3
background image

Install the three bar support equipment.

9. Remove the front wheel and tire assemblies. 

10. NOTE:  Right side shown, left side similar.

If equipped, remove the pin-type retainers and the corresponding inner fender well splash shield(s).

4x4 vehicles 

11. Disconnect the vent hose from the differential housing vent tube.

12. WARNING:  Secure the axle to the jack with a safety strap. Failure to follow these instructions can result in personal injury. 

Secure the axle housing to a suitable lift.

13. CAUTION:  Any time bolts, washers, spacers or nuts are loosened in the differential support for any reason, install new components to prevent

Cylinder Block Cradle|Page 2946 > < Cylinder Block Cradle|Page 2944