Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Wiring Harness: Service and Repair
Internal Harness Service
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect vehicle harness from transmission case (16-pin) connector.
3. Drain transmission fluid.
^
Remove all the transmission fluid pan screws except for two in the front. Loosen the two front transmission fluid pan screws. Pry the rear of
the transmission fluid pan down and allow fluid to drain. After fluid is drained, remove the front two transmission fluid pan screws.
4. Remove the transmission fluid pan.
1. Remove the transmission fluid pan.
2. Remove and discard the transmission fluid pan gasket.
5. NOTE: The main control assembly does not need to be removed.
