ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Relays and Modules - Windows and Glass > < Control Module, Transfer Case|Locations|Page 324
Page 1
background image

Control Module: Service and Repair

Four Wheel Drive (4WD) Control Module

Four Wheel Drive (4WD) Control Module

1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Open the glove compartment, press in on sides and lower it to gain access.
3. Remove the 2 screws.
4. Disconnect the electrical connectors.
5. Remove the four wheel drive (4WD) control module.
6. To install, reverse the removal procedure.

Relays and Modules - Windows and Glass > < Control Module, Transfer Case|Locations|Page 324